Why the generator stopped working again! ! ! ! ! Don't be irritable, please read this article first.

Reason 1: The armature coil is damaged

Troubleshooting method: disassembly overhaul

Reason 2: Regulator failure

Troubleshooting method: Troubleshooting and adjustment

Reason 3: Insufficient power generation - fan belt is too loose

Troubleshooting method: Tuning

Reason 4: Insufficient power generation - poor contact of carbon brushes

Troubleshooting method: Use No. 00 sandpaper to polish the carbon brush and commutator, and wipe it clean

Reason 5: Insufficient power generation - the spring force of the carbon brush spring is too weak

Troubleshooting method: adjust or replace

Reason 6: Insufficient power generation - loose wire

Troubleshooting method: Tighten the binding posts

Reason 7: The bearing is too loose or the noise occurs
Troubleshooting method: replace or add grease

Reason 8: Heating up too fast - short circuit of armature coil
Troubleshooting method: Troubleshooting armature coils

Reason 9: Heating up too fast - magnetic field coil shorted
Troubleshooting method: Troubleshooting Field Coils

Reason 10: Heating up too fast - bearing oil shortage or stuck
Troubleshooting method: Filling with lubricant

Reason 11: Heating up too fast - fan belt too tight
Troubleshooting method: Adjusting belt tension

Reason 12: Heating up too fast - carbon brush spring force is too large
Troubleshooting method: Adjust the elasticity